Multiple Weldment Cut Lists

Discussion in 'SolidWorks' started by Scotty, Jan 30, 2008.

  1. Scotty

    Scotty Guest

    I often want to display two weldments in a single drawing, but find that
    after inserting the first weldments cut list, the option to insert one
    for the second weldment is greyed out. Is there a work around to have
    both cut lists?

    I am aware that the weldment can be saved as an assembly but the profile
    information contained within the cut list is lost so this is not an
    acceptable solution.

    Any ideas? Is SW looking at introducing multiple cut lists in future
    revisions?

    Thanks
    Scott Manning
     
    Scotty, Jan 30, 2008
    #1
  2. Scotty

    jon_banquer Guest

    What version of SolidWorks are you using?

    Jon Banquer
    San Diego, CA
     
    jon_banquer, Jan 30, 2008
    #2
  3. Scotty

    Scotty Guest

    Sorry - 2008 SP1.1
     
    Scotty, Jan 30, 2008
    #3
  4. Scotty

    wc Guest

    You can have multiple weldments in the same drawing, but not on the same
    sheet in the drawing file

    I typically put the weldment in an assembly, I place a view of the
    weldment on one sheet and the assembly on another sheet, so the drawing
    references the weldment file and the assembly file.

    Good luck
     
    wc, Jan 30, 2008
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to cut on multiple faces

  2. Weldment Cut List - listing angle cuts

  3. SW Weldments and Cut-lists - How do I?

  4. Wledments and cut lists

  5. I need help with cut lists in weldments!

  6. Weldment cut-list question

  7. Any way to manually edit weldment cut lists

  8. Mass by default in Weldment properties + Cut List ?

Loading...