Multiple sheet drawing doesn't update all views!

Discussion in 'SolidWorks' started by Pete, May 20, 2004.

  1. Pete

    Pete Guest

    I have a drawing that has 8 sheets, when I open the model and the drawing at
    the same time they don't update all the sheets, there fore whe I print the
    drawings they print sheets withcrossedout drwawing views.
    Is there a solution to this problem? If so what is it please?

    --


    ---------------------------------------------------------------------
    "Are you still wasting your time with spam?...
    There is a solution!"

    Protected by GIANT Company's Spam Inspector
    The most powerful anti-spam software available.
    http://mail.spaminspector.com
     
    Pete, May 20, 2004
    #1
  2. Pete

    Richard Doyle Guest

    Check under tools>options and see if "allow auto-update when opening
    drawings" is checked.

    Richard
     
    Richard Doyle, May 20, 2004
    #2
  3. Pete

    Richard Doyle Guest

    Sorry - should be tools>options>drawings
     
    Richard Doyle, May 20, 2004
    #3
  4. Pete

    Pete Guest

    Yes, I have made sure this is checked! Any other solutions?

    --


    ---------------------------------------------------------------------
    "Are you still wasting your time with spam?...
    There is a solution!"

    Protected by GIANT Company's Spam Inspector
    The most powerful anti-spam software available.
    http://mail.spaminspector.com
     
    Pete, May 20, 2004
    #4
  5. Pete

    Richard Doyle Guest

    Check the particular document. Right click on the top of the Feature manager
    and see if "Automatic View Update" is de-selected. I think it can be
    document specific.

    Richard
     
    Richard Doyle, May 20, 2004
    #5
  6. Pete

    Pete Guest

    I am now at work, did what you said, "Right click on the top of the Feature
    manager
    Works now, I really appreciate your help, if not I would have had to redo
    the drawing!
    Thanks again!
     
    Pete, May 20, 2004
    #6
  7. Pete

    pope Guest

    This advice was awesome. My drawing template didn't have this
    selected so all my new drawings were jacked. Thanks.
     
    pope, May 25, 2004
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. can SW 2K4 input automatically Part # or Drawing filename into a multiple sheet drawing?

  2. Multiple Sheet Drawings vs. Single Sheet Drawings

  3. Moving Drawing Views To A Seperate Sheet???

  4. API - how to unhide all sketches of an assembly in drawing views

  5. inserting sketch dimensions from annotation views automaticaly into drawing views

  6. Replacing Drawing Sheet on Multiple Sheet Drawing Package

  7. A better way to update all blocks in a drawing?

  8. How to select all views in a drawing with a selectionset?

Loading...