Moving the margin?

Discussion in 'AutoCAD' started by McNeill, Aug 6, 2003.

  1. McNeill

    McNeill Guest

    I am using AutoCAD 2000 and am plotting to tabloid size 11x17. I see the paper size and the margin fine. The dotted line indicating the right margin is about 1/2" from the edge of the paper. What I would like to do is shift the margins to the right so that the space is on the left. When I look in the help system all I see is how to turn margin display on or off. Thanks in advance....
     
    McNeill, Aug 6, 2003
    #1
  2. McNeill

    F. Gump Guest

    Edit your printer pc3 file to "Modify Standard Paper Size (Printable Area)"
    Or print upside down




     



    "McNeill" <> wrote in message news:...

    I am using AutoCAD 2000 and am plotting to tabloid size 11x17. I see the paper size and the margin fine. The dotted line indicating the right margin is about 1/2" from the edge of the paper. What I would like to do is shift the margins to the right so that the space is on the left. When I look in the help system all I see is how to turn margin display on or off. Thanks in advance....
     
    F. Gump, Aug 6, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Moving to 2005 and the following no longer works...

  2. command to measure noise margin

  3. moving via pcells to the topmost level

  4. Keep the strong dimension while moving an entity in sketch mode

  5. Moving an imported pre made sketch around the drawing area.

  6. Plot gets scaled down due to margin! HELP

  7. How to add MARGIN?

  8. Help; Changing margin size

Loading...