Move bill of materials

Discussion in 'SolidWorks' started by Henk Kemper, Oct 8, 2006.

  1. Henk Kemper

    Henk Kemper Guest

    Hello,

    How can I in a script select the bom of a drawing and move it say 30mm up?

    Thanks.

    Henk
     
    Henk Kemper, Oct 8, 2006
    #1
  2. Henk Kemper

    j Guest

    Not sure if this would work but can you have a point on the drawing
    template that is dimensioned be your anchor point for the BOM and
    changing that dimension would move the BOM
     
    j, Oct 9, 2006
    #2
  3. Henk Kemper

    Henk Kemper Guest

    The problem is that the drawings already exists: with a script I'm going to
    replace in existing drawings the sheet templates by new ones. The new ones
    are a bit larger than the old ones. So I have to move the bom's, wich are
    attached to the upper side of the title blocks.
    Henk
     
    Henk Kemper, Oct 9, 2006
    #3
  4. Henk Kemper

    j Guest

    Do your current drawing sheets use a BOM anchor. If so, you should be
    able to define the new anchor point in the new drawing sheet and the BOM
    would link to that anchor point.
     
    j, Oct 10, 2006
    #4
  5. Henk Kemper

    Henk Kemper Guest

    No, we didnot use it. Is it in a script possible to do that afterwards?

    Henk
     
    Henk Kemper, Oct 12, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Advice needed regarding Bill of Materials

  2. Bill of materials showing wrong part name?

  3. DASH NUMBERS IN THE BILL OF MATERIALS

  4. bill of materials editing

  5. Bill of materials data

  6. Bill of Materials

  7. Excel-based bill of materials : text justification

  8. bill of materials questions

Loading...