modify geo tol attached to a dim?

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by jjW, May 4, 2006.

  1. jjW

    jjW Guest

    How can i modify a geometric tolerance that is attached to a dimension?
    I am using Wildfire & i have tried everything... Thanks in advance for
    info.
    john
     
    jjW, May 4, 2006
    #1
  2. jjW

    John Wade Guest

    Query select (RMB) - the gtol will be the second choice when the select
    menu opens
     
    John Wade, May 4, 2006
    #2
  3. jjW

    David Janes Guest

    You can also set the Selection Filter (bottom of screen) to Gtol, then you'll pick
    it directly.
     
    David Janes, May 4, 2006
    #3
  4. jjW

    Bob Schwerdlin Guest

    Place the mouse cursor over the dimension with the geotol frame.
    Right click and hold to "pick by list"
    Select the "geotol" line in the list
    Next... right click on the geotol frame in the dimension and then modify.

    Bob
     
    Bob Schwerdlin, May 5, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. how to convert an xref from overlay to attached

  2. Determining if an object has a reactor attached

  3. changing draworder of attached image

  4. XREF Attached?

  5. Lisp routine to Label an alignment with MTEXT attached Leader

  6. config.pro options for metric units & ISO tol std.?

  7. tight tol. grinding

Loading...