mirror surface body's

Discussion in 'SolidWorks' started by Sean Phillips, Sep 6, 2003.

  1. Sean Phillips

    Sean Phillips Guest

    just so no one else has any problems. on 2004 if you try to mirror
    surface's as body's. and a suface body is not knit'd to a surface that
    is coinsident to the mirror plane. the knit button will fail. what you
    can do is knit it to the closest surface body coinsident to mirror
    plane.
     
    Sean Phillips, Sep 6, 2003
    #1
  2. Sean Phillips

    Sean Phillips Guest

    i looked at it some more. if you delete the knit befor the mirror.
    then the mirror will get an error and you have to turn off the button.
    but if you roll back and delete the knit then roll forward. the mirror
    knit will work. even with ctrl Q.
     
    Sean Phillips, Sep 6, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Create one body with an assembly

  2. Pattern a extruded surface around a multi curved surface

  3. Surface Phill.....vs Surface Untrim

  4. 2D drawings - Surface body

  5. Mirror Table Top Surface in Photoworks

  6. flat pattern from surface body.....

Loading...