minimum thickness.... why ?

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by stinky wizzleteet, Jul 1, 2004.

  1. stinky wizzleteet

    stinky wizzleteet Guest

    ever notice that when one wants to enter a thickness, sometimes you get
    a message saying that the min thickness is x ?

    why is this and where can i change it ?
     
    stinky wizzleteet, Jul 1, 2004
    #1
  2. stinky wizzleteet

    David Janes Guest

    : ever notice that when one wants to enter a thickness, sometimes you get
    : a message saying that the min thickness is x ?
    :
    : why is this and where can i change it ?

    go to edit>setup>accuracy and move the decimal point to the left one more place.
    see if that changes the lower limit. this sets the proportion or ratio between
    part envelope and smallest feature dimension, usually thickness. if you change
    this ratio, you should find that lower limit changed too.
     
    David Janes, Jul 1, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to convert arcs in to minimum segments of polylines

  2. Minimum length of Line / Polylines that can be broken by Break command?

  3. How to solve layout Minimum Density Area across chip / CHIP Area must be >= 14%

  4. Why why why, virtuso LSW can't change layer

  5. Why Why Why .......

  6. minimum wall thickness..

  7. Minimum Bending Radius for a given thickness of sheet metal

  8. Why SW + Why not Autocad ?

Loading...