Mass Analysis

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by Gertjan Spierenburg, Sep 6, 2004.

  1. Gertjan Spierenburg

    Gertjan Spierenburg Guest

    Hi

    A have a question about the inertia tensor calculated in Pro Engineer.
    The tensor is shown with Ixy, Ixz etc.
    But the definition of the tensor is with -Ixy,-Ixz (count for all products
    of inertia).
    The question is which value is presented in the analisys?
    Ixy or -Ixy?

    Hope someone know more. And if -Ixy is used may be the tensor display can
    have the minus sign too.

    Bye the way I'm using ProE 2000i

    Gertjan Spierenburg
     
    Gertjan Spierenburg, Sep 6, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to get dc operating point data from a swept dc analysis or aparametric dc analysis in ocean

  2. DC analysis gain differs from AC analysis gain

  3. mass property and COG

  4. Update Mass Property in browser tree

  5. Mass Button

  6. set surface area and mass in the note

  7. how to display mass and material in a drawing table

  8. how to display mass and material in a drawing table

Loading...