make sheetmetal

Discussion in 'SolidWorks' started by thestew, May 12, 2009.

  1. thestew

    thestew Guest

    Can anyone tell me if an assembly of a flanged box with 4 seperate
    sheetmetal parts all with multiple bends can be made into one
    sheetmetal piece, Or maybe 2 instead of 4. I am not sure of how to
    start, I dont think shelling it and then making sheetmetal will work
    because of the extra bends needed. Any suggestions would be greatly
    appreciated. If anyone has a similar part they can send me that would
    be cool to. See attached...
     
    thestew, May 12, 2009
    #1
  2. thestew

    Cliff Guest

    ??

    ASCII-only newsgroup.
     
    Cliff, May 13, 2009
    #2
  3. thestew

    thestew Guest

    Nevermind got it...
     
    thestew, May 13, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Proe Sheetmetal

  2. Sheetmetal view modes

  3. Sheetmetal bend reliefs - not working

  4. USA-IL Contract work for PRO/SHEETMETAL, BSME preferred

  5. Flat pattern from circular extrusion in sheetmetal?

  6. Wildfire 2 Pro/SHEETMETAL issues

  7. make a cone in sheet matel, then make a flat pattern

  8. from Pro/E sheetmetal to SW sheetmetal...

Loading...