Macro text help

Discussion in 'SolidWorks' started by Erik, Jun 25, 2003.

  1. Erik

    Erik Guest

    I've noticed some macros in this group where the code is posted. How
    do I take the code and make it a macro on my machine? Do I need VB on
    my machine? There have been some that would seem useful but I can't
    figure out how to make them work.

    -Erik
     
    Erik, Jun 25, 2003
    #1
  2. Erik

    Philippe Guglielmetti Guest

    For macros, you don't need VB : the needed VBA (Visual Basic for
    Applications) is installed with SolidWorks.
    The simplest is to record a dummy macro, save it under the name you want,
    then edit it and cut/paste the code in place of the dummy one.
    You may find some samples and links on
    http://www.dynabits.com/sw/free_stuff.htm

    Philippe Guglielmetti - www.dynabits.com
     
    Philippe Guglielmetti, Jun 25, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Suppress Text Window During Macro - A2K4

  2. Help! Text underline & set text height to 1/8

  3. print text from a macro to a printer

  4. rotate text basic macro

  5. Call a macro from another macro?

  6. Macro to rerun a macro

  7. Macro for Text change in extrude

  8. Is it possible to run a macro file from another macro file?

Loading...