Looking for a Tutorial or Presentation on "Knurling"

Can someone here please tilt me in the right direction towards a
Tutorial or a Power Point Presentation on the technique of knurling ?
For some reason I cannot find any literature, anywhere on the subject,
other than the ones listed in the Texture utility of Solidworks, which
are much too blurry and of very poor quality. There certainly must be a
technique whereby a sharp knurl can be modeled.
I need to model a 1" round shaft, and also I need to model a pistol
grip of a revolver. I am going to follow the assumption that the
principle of modeling the two would be pretty much the same.
More than several of us in my Solidworks Class, would be very grateful
for any information you would be willing to share with us.
Karen

 

I model knurls as features as often as I model fastener threads: NEVER!
Why burden your model with 100's (1000's?) of tiny surfaces and
features? If the knurl cuts have helix geometry, this is a very large
burden for such a feature.

Typically for a knurl I model knurled surface at knurled diameter and
use a cosmetic thread to denote knurled region and contain notes about
knurl.

 

select surface, right click, appearance> texture> metal> machined> knurl
texture. imho, not for use on drawings.

 

That70sTick is right I would normally never model threads or knurls.

However I did for job last year where I needed to make a rendering, as I
couldn't get a good image using textures. I have uploaded 2 versions of the
part to my website, you will notice the version with a modeled thread and a
knurl is about 12 x larger in file size at 6mb.

www.solidengineering.co.nz/help/ThumbScrews.zip

John Layne
www.solidengineering.co.nz