Long Plot cut short

Discussion in 'AutoCAD' started by Glen P., Mar 30, 2005.

  1. Glen P.

    Glen P. Guest

    Plotting from AutoCAD 2005 to a HP DesignJet 650c on file. Plotter is set for 16.7 million shades of grey at 600dpi. The plot should print 30X60 but cuts short at 48inches. At 300dpi the plot is complete. The problem does not appear to happen when plotting from 2004 or 2006.
     
    Glen P., Mar 30, 2005
    #1
  2. Glen P.

    Tripp Corbin Guest

    Can a HP 650c actually plot 600 dpi? It has been a long time since I used
    one but I thought it was limited to 300 dpi. It sounds like the plot being
    generated from ACAD 2005 is to big for the plotter to handle. Have you tried
    setting it to process on the computer instead of the plotter via the print
    driver?

    --
    Tripp Corbin, GISP, MCP
    Associate Vice President, GIS/Mapping
    ESRI Authorized Instructor
    Keck & Wood, Inc.
    (678) 417-4000
    www.keckwood.com
    (678) 417-4000
    (678) 417-8785 Fax
     
    Tripp Corbin, Mar 30, 2005
    #2
  3. Glen P.

    Glen P. Guest

    Choices are limited. 16.7 grey, 16.7 color, 255 virtual pens, which does not hold line weights, or 2 colors grey. DWG is plotted to a file to be used in Reprodesk. Hp 650c hdi driver.
     
    Glen P., Mar 30, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. editing zoom for short cut

  2. Can you make Cont-R short cut key? minimize icons use.

  3. "S" Short cut Key

  4. Customize Contl+ Letter short cut key in Microstation -as with Acad accelerators?

  5. short cut menu

  6. Paper Space Plot Cut Short

  7. Customize Contl+ Letter short cut key in Microstation -as with Acad accelerators?

Loading...