Loading Solidworks from network.

Discussion in 'SolidWorks' started by JKimmel, Oct 20, 2005.

  1. JKimmel

    JKimmel Guest

    I have copied my SW 2006 disks onto the network. I then loaded it onto
    my computer but I had to move some files around in the network copies to
    get it to load. With the disk copies on the network, it was much easier
    to load the service pack.

    My question is, can somebody else use my copy of the disks to load SW in
    their computer with their own user registration? I assume that all SW
    program disks are the same and that only the registration is different.

    Thanks,
    --
    J Kimmel

    www.metalinnovations.com

    "Cuius testiculos habes, habeas cardia et cerebellum." - When you have
    their full attention in your grip, their hearts and minds will follow.
     
    JKimmel, Oct 20, 2005
    #1
  2. Yes. Here we load the CD set on the network and then all installations &
    updates are made from that set. Saves on the CD shuffle.

    WT
     
    Wayne Tiffany, Oct 20, 2005
    #2
  3. JKimmel

    John Layne Guest

    You assume correctly, they only need different reg numbers

    John Layne
    www.solidengineering.co.nz
     
    John Layne, Oct 20, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.