lines wrong on 19" flat crt monitor

I have recently purchased three new pcs and monitors. The monitors are 19"
flat CRT and when I work on them in XSteel Drafting program the lines in the
corners do not remain straight. This only occurrs with the 19" CRT that I
purchased. I have tried these pcs with a regular CRT monitor and the lines
are correct.

I realize this isn't autocad but I was hoping that someone may have
experienced this problem when drafting in autocad. I can't find the XSteel
newsgroups or I would not be bothering you folks.

I would certainly appreciate any information or advice you can give me
though

adeleted

 

This seems to be a monitor problem. Adjust the pincushion settings on the
monitor while a grid of lines is displayed. Go through the button options on
the front of the monitor until you see a rectangle with curved edges or
pincushion. Also reduce the overall image size until the edges are visible,
they should be straight.

 

Nokia has a very nice program that helps when adjusting the settings for
any monitor.
http://freepctech.com/rode/004.shtml
Your monitor manual should tell you what needs adjusting, based on what
the Nokia program displays (especially the geometry screen for the
problem you've described)