Lines to tubes

Discussion in 'SolidWorks' started by Chris Maryan, Jul 29, 2003.

  1. Chris Maryan

    Chris Maryan Guest

    What's the fastest way to convert a 3D sketch into solid tubes (arbitrary
    cross section)? I need to do this to a really large number of line segments
    and could really use a time saver over setting up the lofts.

    Thanks,

    CM
     
    Chris Maryan, Jul 29, 2003
    #1
  2. Chris Maryan

    neil Guest

    it isn't clear to me what you mean-as in you have a number of different
    diameter pipes running every which way?or a group of same running in
    parallel? by line segments you mean end to end along the same path?
     
    neil, Jul 29, 2003
    #2
  3. Chris Maryan

    Chris Maryan Guest

    Specifically, I'm trying to draw a spaceframe. Presently, the links are
    defined as a series of line segments in a 3D sketch. I would like to turn
    these into tubes with as little effort as possible. Accordingly, the pipes
    run every which way. There are only 2 or 3 cross sections in use, but the
    frame is fairly large and complex.

    CM
     
    Chris Maryan, Jul 30, 2003
    #3
  4. Chris Maryan

    neil Guest

    I think space frames have been talked about here before have you done a
    search in google of this group? I vaguely remember Cliff saying something
    about a macro- could be wrong though-maybe someone has some ideas
    specifically for this situation
     
    neil, Jul 30, 2003
    #4
  5. Chris Maryan

    Jim Sculley Guest

    If you can wait for 2004, it may help a great deal.

    Jim S.
     
    Jim Sculley, Aug 2, 2003
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.