Linear Center Mark with Connection Lines

Discussion in 'SolidWorks' started by chief_brody, Feb 15, 2006.

  1. chief_brody

    chief_brody Guest

    I have a part with a bunch of holes. I create a drawing and add linear
    center marks with connection lines to the holes. The connection lines
    are nice. It indicates that two or more holes are on the same 'X' or
    'Y' coordinate. Then, the part needs to be revised. I have to add
    more holes, on the same 'X' or 'Y' coordinate. However, the drawing
    doesn't allow you to add center marks to the "group" of center marks on
    the drawing already. You have to just add more center marks. Is it
    possible to "connect" these center marks with the already drawn
    connection lines/center marks?
     
    chief_brody, Feb 15, 2006
    #1
  2. chief_brody

    Wayne Tiffany Guest

    Not that I know of - I have wanted to do that myself. Enhancement req?

    WT


    *** Free account sponsored by SecureIX.com ***
    *** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
     
    Wayne Tiffany, Feb 15, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Needed: Center Mark Lisp

  2. Not Getting "Select Via Layers for Mark Net" form while doing Mark Net

  3. Dim. Extension Gap form Center Mark

  4. Changing centerline and center mark fonts.

  5. Linear Sketch vs Linear Pattern

  6. Dangling center marks and center lines

  7. Connection Lines for Center Marks Option

  8. Linear-Linear coupler mate

Loading...