Line jaggies

Discussion in 'AutoCAD' started by John Sieber, Jul 11, 2004.

  1. John Sieber

    John Sieber Guest

    I've noticed this problem lately - maybe it was always there and I just
    didn't think about it. I've noticed that diagonal lines on my plots are
    stair-stepped or jaggie (aliased). I'm printing to an Epson 1280 and now
    an Epson 7600, from LD3, using the sytem driver for each Epson. Even
    using the highest printing resolutions (2880) and paper settings, lines
    are still stair-stepped. Is this true of any inkjet printer (as opposed
    to pen plotters where a diagonal line is a true straight line created by
    the physical pen), or is this a printing language issue - as in
    postscript / HPGL-2 / Epson ESC...?

    Any help?
     
    John Sieber, Jul 11, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. draw line to middle of 2 picked lines then offset that line help...

  2. how to read line by line from a file through a OCEAN script

  3. Insert a Cell on an angled line, and have the line break - automatically?

  4. Insert a Cell on an angled line, and have the line break - automatically?

  5. NEED: Single Line Font... (must be single line inside SW also, nptjust MS Word)

  6. Drawing line on command line.

  7. Text: converting Single-line text to Multi-line

  8. Joining line segments into one single line?

Loading...