length of arc

Discussion in 'AutoCAD' started by Greg, Nov 2, 2006.

  1. Greg

    Greg Guest

    How can I get lenght of arc using lisp ? The only way is to calculate?

    Greg
     
    Greg, Nov 2, 2006
    #1
  2. Greg

    per.corell Guest

    If "List" is not enough it will be quite easy to find the group codes
    for bulge and center form the group codes yieled with Entget, and from
    these calculate the intire circumstance 360 deg. and the length of the
    actural Arch -- Bulge , guess the angle the arc cover is described in
    Radians .
     
    per.corell, Nov 2, 2006
    #2
  3. Greg

    Michael Bulatovich Guest

    Have you tried the LIST command?
     
    Michael Bulatovich, Nov 2, 2006
    #3
  4. Greg

    per.corell Guest

    Hi.
    And if you don't want to calculate , have you tried the sysvar.
    *Perimeter* ?
     
    per.corell, Nov 3, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is there a way to set the Rev Cloud ARC length permanently?

  2. How to calculation length of arc

  3. arc length

  4. Arc overlapping on another arc

  5. Draw ARC to length?

  6. Divide arc into specific length

  7. revcloud setvar for arc length?

  8. Dimensioning Arc Length

Loading...