LDT lock up when changing plotters

Discussion in 'AutoCAD' started by Ben Brookman, Jul 8, 2004.

  1. Ben Brookman

    Ben Brookman Guest

    Hi there, I am using LDT 2005 and when I go to select my plotter to use, my
    drawing locks up, and i have to kill the program. I could plot fine
    yesterday. I ran about 60 plots from my pc. Any ideas.

    Thanks

    Ben
     
    Ben Brookman, Jul 8, 2004
    #1
  2. Ben Brookman

    rhodesign911 Guest

    Hi Ben,

    I had a similar problem when trying to select acrobat pdfwriter from <file> <plot>.
    It appears that the system had lost track of the plotter.
    The cure was to access plotter selection via the model, layout1, or layout2 tab <Page Setup Manager> which still seemed to work and that re-found the plotter.
    I can now see the plotter from <file> <plot> too.

    Regards,

    Steve Rhodes
     
    rhodesign911, Jul 9, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. LDT Points

  2. Cursor changing and not changing back

  3. LDT 2005 Object library feature not supported

  4. My Server Lock It Self And My Entire Network Cant Access When Autocad Run On Workstation.

  5. LDT 2005 Network Auth Manager missing?

  6. Standard AutoCAD 2005 vs. LDT 2005 installation

Loading...