Kip Star Print problems

Discussion in 'AutoCAD' started by John, Jan 8, 2004.

  1. John

    John Guest

    Has anyone had any success plotting to Mylar using a KIP Starprint 2000.

    We have had one for about a year and a half and have had nothing but
    problems with this machine, both software and hardware, in fact, too many to
    list here.

    The "service techs" have been out at least a dozen times and without much
    success satisfactorily resolving any of them.

    Our biggest issue right now is that we still can't print to Mylar nor have
    we ever been able to. The primary problem is that the toner doesn't fuse to
    the media. The techs cranked up the heat resulting in very bubbled Mylar
    with spotting results of the toner fusing. Now the machine is broken and
    unusable because of the excessive heat.
     
    John, Jan 8, 2004
    #1
  2. John

    Nate Hunter Guest

    sounds like you need new techs. We had a similar problem and a tech came
    out and fixed. It runs reat ever since. We have had the machine for over a
    year now.
     
    Nate Hunter, Jan 8, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.