Is there a way?

Discussion in 'AutoCAD' started by Dr. After, Mar 5, 2004.

  1. Dr. After

    Dr. After Guest

    Let me explain the situation:

    I have plot size for the shop that is smaller then full scale so that their
    clips on the top of the sheet do not interfere with the drawing. Basically,
    since the print is on the portrait orientation, I don't have the option of
    lengthening the sheet or cutting it a different way. So with this scaled
    down print, it leaves about a 2" gap at the top.

    My question is:

    Is there a way I could have a text message added into that 2" gap at the top
    of the sheet that would only show up when printed under this scaled down
    size? I am not sure if this would be something added into the drawing
    itself that would not be in the plotable area (which I would rather not do
    as then I would be working around this in my layouts) or if it could be
    something added into the plot command like a plot stamp. Any ideas?
     
    Dr. After, Mar 5, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Is there a way to put a temporary "X" where you pick in a routine.

  2. Is there a way to "ssget" a line in an xref?

  3. Is there a macro out there that...

  4. Is there a macro out there that...

  5. Are there any solid models of KITT out there?

  6. I was told there is a macro out there that...

  7. HELP WITH VB.NET AND AutoCAD! Are there out there any gurus?

  8. Is there anyone out there using Inventor 8?

Loading...