Is there a way for Pro/Engineer to tell me the path of a part in my mechanism as I change the locati

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by Mark Klynn, Apr 19, 2004.

  1. Mark Klynn

    Mark Klynn Guest

    Is there a way for Pro/Engineer to tell me the path of a part in my
    mechanism as I change the location of the ground points? I need my
    part to avoid colliding with other parts in the assembly and I can't
    find a feature that will show me how my mechanism prototype works.
     
    Mark Klynn, Apr 19, 2004
    #1
  2. Mark Klynn

    Alberto Campos Guest

    I do not believe there is a way for Pro/E to provide the path for you,
    but you may be able to use an add-in called SyMech to help you with
    your problem. It allows you to see the path of any point on your part
    and the path updates automatically when you change your mechanism
    ground point locations.
     
    Alberto Campos, Apr 27, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. is there any way to change the pickbox color

  2. Is there any easy way or SKILL program to put VIA arrays correctly on the diagonal path ?

  3. programms for engineer Pro Engineer Wildfire wuth moduls

  4. Is there a way to fix Wildfire license path?

  5. 2005/05/22 PTC Pro Engineer Wildfire V2.0 M120, PTC Pro Engineer Wildfire V2.0 For XP64, new !

  6. Is there a way to change layer settings for multiple sheets?

  7. Is there a way to set the default for the view settings to "Details" when opening dwgs from ACAD 200

Loading...