Is it possible to link the area of a flat pattern (sheetmetal) part to a drawing field?

Discussion in 'SolidWorks' started by SW Monkey, Nov 17, 2006.

  1. SW Monkey

    SW Monkey Guest

    I know that if you click on a flat pattern face and use the measure
    tool, this will give you the square area of that part. Is it possible
    to link this to a field on a drawing?

    Also, if anyone has a macro that will give the square area of a part in
    feet, please post. Currently, I have to change the units from inches
    to feet whenever I need the area of a part.
     
    SW Monkey, Nov 17, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Put a field link in attribs

  2. Flat pattern from circular extrusion in sheetmetal?

  3. SV: Sheetmetal Flatpattern view not Flat

  4. Sheetmetal Flat Pattern drawing view macro

  5. Is this possible, area of a sheetmetal part (square area)

  6. Flat pattern of a mirrored sheet metal part

  7. Macro for Part to Flat Pattern DXF?

Loading...