Is Cadence LDV 5.1 and IC 5033 run on REDHAT 8?

Discussion in 'Cadence' started by Juvezio, May 26, 2004.

  1. Juvezio

    Juvezio Guest

    Is Cadence LDV 5.1 and IC 5033 run on REDHAT 8?
     
    Juvezio, May 26, 2004
    #1
  2. Juvezio

    Erik Wanta Guest

    Terry:
    I don't believe rh8 is officially supported for either ldv51 or
    ic5033. I think rh8 will be officially supported by IC5141 and IUS53.

    Note that I have been running ldv51 and ic5033 on rh8 for awhile and
    have not seen any major issues.

    In assura it crashes when I try to open the LVS error report. Has
    anyone else seen this?
     
    Erik Wanta, May 27, 2004
    #2
  3. Juvezio

    Andrew Beckett Guest

    Erik,

    The assura crash has been reported a number of times - we've not got to the
    bottom of the cause, because it doesn't happen with some patch configurations.

    Some customers have seen that crash on RH 7.3 too...

    Andrew.
     
    Andrew Beckett, May 27, 2004
    #3
  4. Juvezio

    hal Guest

    Interesting, I've been running LDV40 on Redhat8 for quite some time now,
    without any problem.

    Of course, I tried Redhat9, and found that I could not get LDV40 or
    SPR50 to install on either system. Eventually, I figured out to install
    them to a Redhat8 machine, then tar the entire installed-dir and copy
    it to the Redhat9 machine.

    Afterwards, I found that PKS 5.0.9 doesn't run under Redhat9
    (crashes with some 'SEGV violation' error message.)
     
    hal, May 28, 2004
    #4
  5. Juvezio

    Ulrich Guest

    Hi,

    I just downloaded a new checkSysConf from sourcelink some days ago and there
    seem to be full support for IC5.0.33 and LDV5.1 for RedHat 8.0.
    You won't see that with the checkSysCOnf within the 5.0.33 releases ...

    best regards

    Ulrich
     
    Ulrich, Jun 25, 2004
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Cadence Spectre and Virtuso on RedHat Linux 9.0

  2. Cadence Spectre and Virtuso on RedHat Linux 9.0

  3. itkDB.a: undefined reference to `__ctype_b' on Redhat system

  4. I can't run IC5033 under redhat AS3, how should I do?

  5. Memory Leak in LDV 4.1 and 5.1 when using Restart?

  6. License Cadence - Linux IC5141 - redhat 9

  7. snapshot of schematics made in Cadence IC 5033?

  8. Pro-E wildfire on RedHat Linux?

Loading...