is 2008 stable yet?

Jon,

Exactly what are you working on that "it" is a major problem for you?

Per your recent posts you are a machine operator. Why does a machine
operator need to know how the model was built or what a parts design
intent is and/or how an assembly is mated?

When did you purchase and install SolidMap?

Tom

 

Word salad: http://en.wikipedia.org/wiki/Word_salad

Buzzwords that is .... LOL ....

HTH

 

Word salad: http://en.wikipedia.org/wiki/Word_salad

What do "they" say about buzzword salad?
While you try to imitate someone with a clue?

His brain on buzzwords:
http://images.google.com/images?hl=...arch/schiz.brain.htm&btnG=Search+Images&gbv=2

A home for jb? http://www.loni.ucla.edu/

 

Utter & abject cluelessness.

 

This rings a bell ...... Pavlov's. Doubt a school dropout/kickout
ever heard of him though.

"Please let me clarify that Jon is not affiliated with HSMWorks ApS in any way
and that we cannot control what people are writing on the web."
"Anybody can get evaluation licenses of HSMWorks and test it themselves."
"I hope this clarifies any doubt."

Never, and he'd also have to actually have SW IIRC,
not just some claimed demo training CDs to play backwards
(awaiting the Purple Smoke).

His fool posts on specific SW questions by real users remain
very amusing though.

"Sounds like a problem with D-Cubed's 3DCM." - jon banquer

Let's not forget that he has no idea what "sheet metal" (new buzzword)
is either.

 

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

Gary Knutson, Tom Brewer and Cliff Huprich Tactics Exposed:

http://www.jewishgen.org/forgottencamps/Exhib/HowtoEngl.html

"Sticks and Stones -- If you're being wiped out with evidence and
reasoning you cannot refute, you can always take refuge in complaining
about the language being used by your adversaries. For example, if
they say, "I've already explained that it takes less gas to kill
people than lice, and therefore there are fewer cyanide residues
remaining on the gas chamber walls than on the delousing chamber
walls, you moron," you can respond by complaining about their use of
the word "moron." You can actually evade quite a bit of serious
discussion by spending a lot of time condescendingly lecturing the
newsgroup about their use of trashy language. But this approach
doesn't work very well in building credibility. You may view yourself
as an arbiter of social discourse but you'll actually come off like a
den-mother scurrying around excoriating the little Cub Scouts to
behave themselves."

Jon Banquer
San Diego, CA

 

On Sun, 30 Mar 2008 15:35:35 -0700 (PDT), jon_banquer

Jon,

Are you sooooo clueless you can't answer a few simple on topic
questions?

Tom

 

Jon,

Are you sooooo clueless you can't answer a few simple on topic
questions to support your claims?

Tom

 

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

LOL.....OK Jon, easy to see you're too clueless to answer simple,
direct on topic questions to support your claims.

Tom

 

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

LOL, I guess you got your answer, Tom.

gk

 

A still more proof (as if you needed any).

gk

 

Gary Knutson, Tom Brewer and Cliff Huprich Tactics Exposed:

http://www.jewishgen.org/forgottencamps/Exhib/HowtoEngl.html

"Sticks and Stones -- If you're being wiped out with evidence and
reasoning you cannot refute, you can always take refuge in complaining
about the language being used by your adversaries. For example, if
they say, "I've already explained that it takes less gas to kill
people than lice, and therefore there are fewer cyanide residues
remaining on the gas chamber walls than on the delousing chamber
walls, you moron," you can respond by complaining about their use of
the word "moron." You can actually evade quite a bit of serious
discussion by spending a lot of time condescendingly lecturing the
newsgroup about their use of trashy language. But this approach
doesn't work very well in building credibility. You may view yourself
as an arbiter of social discourse but you'll actually come off like a
den-mother scurrying around excoriating the little Cub Scouts to
behave themselves."

Jon Banquer
San Diego, CA

 

Jon Banquer Tactic exposed:

Jon,

Exactly what are you working on that "it" is a major problem for you?

Per your recent posts you are a machine operator. Why does a machine
operator need to know how the model was built or what a parts design
intent is and/or how an assembly is mated?

What exactly are you doing that SolidMap can fix your SW "Major
Problem"?

When did you purchase and install SolidMap?

How exactly does your link

relate to the subject?

Tom

 

Jon,

Seems you accidentally sent your post before you were able to answer
any of the on topic direct questions asked of you to support your
claims.

Tom

 

Ignorant:

"Jon, I never forgot any of your postings about SDRC I made the wrong
decision in spite of what you said. There have been a number of times
that my Wife has told me to be careful in dealing with someone and
after words says "I told you so". She earned the right to say it as
well as you have earned the right to say I TOLD YOU SO. I made a
decision that went against my better judgment and as usual it turned
out poorly." .... Tom Brewer

Ignorant:

"I do not purchase programs unless I know before hand that they are
what I want and/ or need."... Tom Brewer who can't follow his own
advice. See above.

Ignorant:

Tom Brewer thinking he and his pals like Joe788 can play their Usenet
staking games, lie on a repeated basis and suffer no consequences for
doing so.

Ignorant:

"I have shot myself in the foot, not an easy thing to do when it is
in your mouth and your head is in your ass."... Tom Brewer admitting
what he's often like.

Ignorant:

Someone who has a proven track record of not being able to deal with
or accept the kind of change that occurs in the cadcam market... now
that's ignorant or should we say that's Tom Brewer.

Ignorant:

Someone who doesn't live in San Diego yet insists there is no shortage
of CNC machinists here... now that's ignorant or should we say that's
Tom Brewer.

Ignorant:

Someone who criticizes someone on SolidWorks but has never helped
anyone with specific SolidWorks answers. Someone who is not able to
answer any questions that "Vinny" had on master modeling or skeletal
modeling. Someone who has never posted any models they have done...
now that's ignorant or should we say that's Tom Brewer.

Ignorant:

Tom Brewer's failure to understand who Matt Lombard really is.

Ignorant:

Tom Brewer's unable to comprehend what's on the cover of the
SolidWorks Bible:

"Whether you're a new, intermediate, ...."

Ignorant:

Someone who can't understand more than a simple "I love it!" or "I
hate it!" type of comment ... now that's ignorant or should we say
that's Tom Brewer.

Ignorant:

Tom Brewer implies that because you acknowledge that the $25
SolidWorks course covers subjects / topics that the $650 SolidWorks
course didn't that you're now somehow an idiot and got screwed when
you decided to purchase the $650 SolidWorks course.

Tom Brewer Writing About SmartCAM:

"I ended up paying a consultant $40.00 per hour for two weeks."

"FYI, when I said "Solid modeling" in reference to SmartCam it was
tongue in cheek. What you could not see is that when I was typing that
I was laughing to myself. Anyone that uses SmartCam and Solid
Modeling in the same sentence cannot be taken seriously."

Recently Tom Brewer said SmartCAM had no user interface problems and
yet the record shows Tom Brewer thinks SmartCAM does indeed have user
interface problems:

"The only real problem that I run into is that the screen can get
cluttered and it becomes difficult to pick and choose elements in Free
Form. I just use the utility masking feature to hide what is in the
way, that cures the problem but it does add work (I tried the snap
filtering and snap options but for me it was not the best way), I
have seen other packages that handle picking and choosing in better."

Conclusion:

Tom Brewer thinks he's a SolidWorks expert. A SolidWorks expert is
someone who knows more and more about less and less until he knows
absolutely everything about nothing.


Jon Banquer
San Diego, CA

 

Thanks for the worthwhile feedback TOP, there was a day when almost
all the responses from this group were worthwhile.

Its kind of sad to see a few immature users have degraded this group
to the point of it being useless.

I got burned so badly on SW2007, I can't imagine ever upgrading again
but I think I might try with SP5

 

I think you missed this one....



and


I heard you got one of these, but couldn't qualfity on the simulator
demo.

CC