Interesting Drawing problem

I cannot seem to creat a drawing vew properly here???

http://members.shaw.ca/b.eadie/Clipboard01.jpg

There is one profile extrusion that will not for the life of me change
to just the lines it has to be the shaded withoug lines display state
for only one part? Funny thing is the part is an exact duplicate of the
one on the other side of the tube so why is that one not friggin blody
green too?

My options-Color is set to use the default line color in edges with
shaing mode (black) in options for all assemblies and parts

There is only one display state in the main assembly, sub assembly and
part... and they all show shaded with lines...

So why is the fridding part and only one of two showing shaded without
edges.....

GGGAAAAHHHHHHHHHH!!!!!!!

For as much as I love this program these little gremlins come at the
worst time..


Disgrutled... Bah Humbug!
Ben

 

Further to this is I flipped the display state of one part to edged only
in the assembly, went to the drawing and nouthing flipped it back to
shaded with edges and the drwaign view now shows the other part like the
first, shaded? And to top it all off it wont change back. What the hell?

Ben

 

Ok found this whizzy clear top level overide option in display states in
the top level assembly...now this worked partly....

seems to have corrected my last posts problem but then turned the fisrt
part problem to a sub assembly problem

http://members.shaw.ca/b.eadie/Clipboard02.jpg

Closer but no cigar....

HeLp!!!!
I am slowly going crazy..Crazy slowly going....

 

Ya I did

Thanks for making me check though

Ben

 

One more furthur to that

Ok so if I set the view of the sub assembly to
http://members.shaw.ca/b.eadie/Clipboard03.jpg

The main assembly shows this
http://members.shaw.ca/b.eadie/Clipboard04.jpg

And the drawing works????
http://members.shaw.ca/b.eadie/Clipboard05.jpg


So this is the work around but really what the #$%&!!!!

Ben

 

Ben

We had sort of the same problem with castings and tangent edges hidden,
everything dissapeared. The work around we found (SW2005 SP3) for the
drawing was to reduce the Wireframe and High Quality HLR/HLV resolution in
the Document Properties/Image Quality screen.
Hope this helps

Brian