Intellimouse Buttons

Discussion in 'AutoCAD' started by Rob, Dec 12, 2005.

  1. Rob

    Rob Guest

    Does anyone know how I can program the scroll button to make it pan in
    AutoCAD? I also have 2 buttons on the thumb side and would like to program
    those too. When I go into the program it has an area to customize and when
    I add the command name it tells me that it is not available.

    Thanks,
    -Rob
     
    Rob, Dec 12, 2005
    #1
  2. Rob

    R.K. McSwain Guest

    Rob said the following on 12/12/2005 9:20 AM:
    Make sure your system mouse settings for the scroll button are set to
    'default', 'middle button', 'scroll button' (depends on hardware and
    software) - In other words, not a custom setting.

    Then in AutoCAD, set MBUTTONPAN to 1
     
    R.K. McSwain, Dec 12, 2005
    #2
  3. Rob

    Rob Guest

    I tried that but what was set in the default setting in the mouse setup took
    precedence. Any other ideas?

    -Rob
     
    Rob, Dec 13, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Changing the color of image buttons

  2. Custom Tool Buttons

  3. Radio Buttons

  4. program mouse buttons

  5. help programming extra buttons on intellimouse

  6. Intellimouse with Microstation

  7. Wireless MSFT intellimouse problems

  8. Intellimouse Button

Loading...