inch and mm

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by Danny S., Sep 27, 2004.

  1. Danny S.

    Danny S. Guest

    I begineer in pro/e
    How I can change the units from mm to inch?

    Dany
     
    Danny S., Sep 27, 2004
    #1
  2. Danny S.

    LouR Guest

    Danny, if your using wildfire 2.0 ( in part mode ) go to Edit/Setup/ then
    select UNITS, then pick your units.

    LouR
     
    LouR, Sep 27, 2004
    #2
  3. Danny S.

    David Janes Guest

    :I begineer in pro/e
    : How I can change the units from mm to inch?
    :
    I was going to go way overboard and suggest that you start parts set with the
    units you need. But then I got to thinking that it's almost unavoidable to use
    start parts, so I was thinking of other ways you could wind up with parts in units
    you didn't want and realized there are a bunch of different scenarios for that.
    So, maybe we could backtrack and find out why you have a part in the 'wrong' units
    so I'm not answering the 'wrong' question.

    David Janes
     
    David Janes, Sep 28, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Rounding off to the nearest quarter inch.

  2. Inch Marks in Menu

  3. Sq inch to SQ Foot ?

  4. Convert all files from metric to inch

  5. Square Feet or inch of material from Flat pattern ??

  6. pan head machine screw Inch philips head with configs?

  7. Toolbox -- 1 inch - 12 tpi

  8. METRIC TAP ON INCH DRAWING

Loading...