Impedance setting for ports in Spectre Simulations

Discussion in 'Cadence' started by jmedina, Nov 8, 2006.

  1. jmedina

    jmedina Guest

    Be aware, when using ports in Spectre simulations, a real and imaginary
    impedance can be defined in the properties menu for the device. When a
    reactance is specified, this imaginary part is valid only when running
    small signal analyses like sp, ac, and noise. The reactance will give
    erroneous results if pss, psp, and pnoise analyses are run. We are
    reporting this to Cadence as an action item.
     
    jmedina, Nov 8, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Lisp routine for setting default hatch setting to "associative"?

  2. Recovering spectre simulations

  3. calculating input impedance

  4. LNA Differential impedance matching

  5. log all notices (about limit violations) in spectre tran-Simulations

  6. Creating a custom resistor from single metal layer in Cadence for transmission line ports

  7. Calibre question: why initial ports before transformation differ from netlist IO subckt ports

  8. view ports etc for plotting

Loading...