hydraulic lisp or symbols

Discussion in 'AutoCAD' started by lb, Feb 23, 2004.

  1. lb

    lb Guest

    looking for hydraulic lisp routine R2002
    Thanks
     
    lb, Feb 23, 2004
    #1
  2. lb

    Paul Turvill Guest

    To do what? "Hydraulic" doesn't tell us much.
    ___
     
    Paul Turvill, Feb 24, 2004
    #2
  3. lb

    lb Guest

    just need symbols with description
     
    lb, Feb 24, 2004
    #3
  4. lb

    Paul Turvill Guest

    Still not much help. "Hydraulics" means different things to different
    people: a civil engineer might think of drainage, or water supply; a
    mechanical guy might think of fluid power applications. Besides, LISP is a
    programming language, not a source of "symbols with description" -- what you
    may be asking for is a block library, but without a better description, you
    won't be getting much help here. Why don't you just go to
    http://www.google.com and try your luck with a few choice keywords.
    ___
     
    Paul Turvill, Feb 24, 2004
    #4
  5. lb

    lb Guest

    **** off If you dont get it.......find something elese to do with your
    (specific) fucking time .
     
    lb, Feb 25, 2004
    #5
  6. lb

    B. W. Salt. Guest

    I don't think that will get you very far. Despite what you think, the
    comments were made in an attempt to reveal what you are really looking
    for. Nobody is trying to be 'clever' with you.

    Just try to respond like a gentleman and not like a thug - and you will
    find that you get what you want.

    My own opinion is that you are looking for symbols (schematics) for
    hydraulic (fluid) control valves and such like. If that is so, just say so
    and don't mess about with unnecessary foul language.
     
    B. W. Salt., Feb 25, 2004
    #6
  7. lb

    Paul Turvill Guest

    Geez, guy, I was just trying to get enough information to offer some help. I
    don't see anyone else offering any suggestions, and I assume because they
    are as mystified as I am as to what you really want. Since you prefer to act
    like an idiot, I'll treat you like one: Congratulations, you have been added
    to my Bozo Filter <<PLONK>>
    ___
     
    Paul Turvill, Feb 26, 2004
    #7
  8. lb

    baz Guest

    There is no need for that.
    Paul is one of the more helpful on this group.
    Did you have a Google before you posted?
    Baz
     
    baz, Feb 26, 2004
    #8
  9. .....took you long enough, Paul.

    <<PLONK>>
     
    Michael Bulatovich, Feb 26, 2004
    #9
  10. lb

    Paul Turvill Guest

    ;-)
    ___
     
    Paul Turvill, Feb 26, 2004
    #10
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.