Human Femur Modal analysis using ANSYS program

Discussion in 'SolidWorks' started by hani_aden, Apr 17, 2007.

  1. hani_aden

    hani_aden Guest

    Hello
    my name is Hani

    my thesis is about to calculate natural ferquencies and modal shape to
    the Human Femur using ANSYS program ver.10.
    i had completed the meshing process. after meshing the femur size was
    206 Mb mega byte .
    when i start in solution stage and when i complet the boundry
    condition for my problem , and when i give solve order and in any way
    of solution ways like Block lanzos , Supspace, ....or REDUCED METHOD.
    after about one or two mint i get Fatal error message in ansys :
    this modal requires more scratch space thanavailable, currently
    244887881 w0rds(934mb) ansys was not able to locate more nmemory to
    proceed please shut down the applications that my be running or icreas
    the virtual memory on your system and rerun ansys.problem terminated .

    Knowing that my computer Ram 2048 mb , and i am also had added large
    size from my hard to be as Ram .

    please any imprtant tips i will be grateful
    THanks to all those like to help humans
    Special thank to Mr. Dave Parker for his last helping
     
    hani_aden, Apr 17, 2007
    #1
  2. hani_aden

    TOP Guest

    How many DOF do you have? You need just enough to capture the highest
    mode shape you can expect.

    Use a hex mesh to reduce the DOF of the model (my personal favorite).

    Search the newsgroup for 3GB switch.

    Check the ANSYS documentation for allocation of file space for large
    jobs.
     
    TOP, Apr 17, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.