HP designjet 430

Discussion in 'SolidWorks' started by st, Oct 12, 2005.

  1. st

    st Guest

    I hope anyone can help me out regards HP DesignJet problem.
    It seems that SW cannot print out on A1, A2 cutting paper with full fit
    drowing.
    But since HP Designjet 430 was the one of the most reasonable tools, not a
    few users must be working with the plotter, i guess.
     
    st, Oct 12, 2005
    #1
  2. st

    CS Guest

    I think we had a c450 and I always had problems with it. Recently I
    finally figured out what the problem was. It defaulted to a 36"roll in
    the driver so when you set it to auto rotate to save paper it would
    rotate it sideways and cut half of the print off. So make sure your
    roll setting is identical to your actual roll and that auto-rotate is
    on. I don't know if this really has anything to do with your issue or
    not.

    regards,
    Corey
     
    CS, Oct 14, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. HP DesignJet 5500PS

  2. Hp Designjet 700

  3. Plotting on an HP450C DesignJet

  4. Q: Designjet 430 and Autocad 14 plotting

  5. DesignJet 430 Color Upgrade

  6. Designjet 430 output always A4

  7. printing HP 430

  8. Data Error on a DesignJet 430

Loading...