HP Designjet 1050c and 750c+ problems

Discussion in 'AutoCAD' started by Doron Shadmi, Feb 24, 2005.

  1. Doron Shadmi

    Doron Shadmi Guest

    Hallo people,

    I download the last updated 1050c,750c+ and 560c HP Designjet drivers from HP website.

    I have Windows-XP (SP2), AutoCAD2005-Ldd on HP-compaq computer.

    My problem is: I use the autospool option and as a result I get
    an empty spool file (only hpgl/2 headers, but no data) if I use the 1050c or the 750c+ drivers ( the 650c has no problems).

    This problem with the above two drivers is unstable, because sometimes (if I produce the print from a layout) I get correct spool files and sometimes (if I produce the print from the model space) I get null spool files.

    I also tried to produce the print to a file, but I get the same problem.

    I have a lot of disk space and a big memory (512 mb) so there
    is not space problems.

    Because of this problem, my company cannot upgrade from 2002 to 2005.

    Can someone has a solution???

    Thank you.

    Doron Shadmi
     
    Doron Shadmi, Feb 24, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. HP PLOTTER 750C Plotter "Out of Memory Data Lost" Message

  2. 750c plus drivers

  3. DesignJet 1050c Paper too small

  4. ADT2004 & DesignJet 1050C config & driver

  5. Setting non-printable areas w/ HP 750C+

  6. 1050C grey problems

  7. Help with .ctb and pc3, HP Designjet 750C

  8. Problem Printing to Designjet 1050C

Loading...