HOW USE AUTOCAD 14!? - help!

Discussion in 'AutoCAD' started by AL, Nov 1, 2003.

  1. AL

    AL Guest

    I'm sorry only now I understood that I had to speak english!!

    I've a gwd file:
    I can see it only in the LAYOUT visualization!
    1. Why I can't see it in the MODEL visual. ?
    2. Is it possible?
    3. How can I put the draw in the MODEL vis. from the LAYOUT vis. ?

    Tnx!!
     
    AL, Nov 1, 2003
    #1
  2. AL

    bestafor Guest

    HiHo;
    Attach the file and I will try to help you.
    If I understand you, when you switch to
    mspace the drawing isn't there?
    Try the "model" check box at the bottom
    of the screen. Do a zoom extents and the
    drawing should show up. What version of
    AutoCad are you using.
     
    bestafor, Nov 2, 2003
    #2
  3. Was everything drawn in Paperspace? Here's an easy way to tell:
    1. In Paperspace start the "ERASE" command
    2. Type "ALL"
    3. Look at the command line it should say how many items were found (i.e.
    "15 found") and how many were filtered out (i.e. "6 were filtered out").
    4. If it doesn't list anything as filtered out then everything in the
    drawing is in the current space (i.e. Paperspace or Modelspace, whichever
    you're in when you do this).
    5. Hit "ESC" key to cancel the command (to make sure you don't erase
    everything!)

    Just a thought,

    Michael (LS)
     
    Michael \(LS\), Nov 2, 2003
    #3
  4. AL

    AL Guest

    No, when I click on the 'model' check box at the bottom of the screen i
    can't see anything... also if i do a zoom extents ... :( boh...

    tnx!
     
    AL, Nov 2, 2003
    #4
  5. You could send the file to me and I'll take a look at it.

    Michael (LS)
    nekkidnorman @ yahoo.com - Remove the spaces on both sides of the "@" to
    email me.
     
    Michael \(LS\), Nov 3, 2003
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.