how to setup interface between cadence design frame work and hspice

Discussion in 'Cadence' started by ponderboy, Mar 27, 2006.

  1. ponderboy

    ponderboy Guest

    i use ic5033.usr3 and HSPICE2004.09,and i want to use HSPICE simulator
    in DFII simualtion ADE.What should i do to use hspice simulator?
     
    ponderboy, Mar 27, 2006
    #1
  2. ponderboy

    Andrew Beckett Guest

    This is a bit of an open ended question. Is your design kit set up to use
    hspiceD (or if not, the older hspiceS interface)? If so, select
    Setup->Simulator/Dir/Host in ADE, and set hspiceD (or hspiceS) as the simulator.

    That's it. You do need to have product 32760 to access the HSPICE interfaces
    though. If you're asking how to set up the PDK, then that's a matter of
    providing the hspiceD simInfo in the CDF for each component (easiest to look in
    analogLib to see how it is done there), and also providing a stopping view
    (generally a copy of the symbol, called hspiceD).

    Best bet is to read the manual... second best bet is to ask a more precise
    question...

    Andrew.
     
    Andrew Beckett, Mar 31, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. What is the potential difference between HSPICE and Spectre ?

  2. Different Results between Unix Cadence 4.46 and Linux Cadence 5.032

  3. Silicon Ensemble and Design Compiler Interface

  4. Integration between Cadence design flows and foundries' design kits

  5. HSPICE interface with cadence artist

  6. How setup Interface Element with 2 differents power supply

  7. Can a Page Setup be shared between Model and Layout?

Loading...