How to set pins' connection in SOC encounter?

Discussion in 'Cadence' started by renee, Aug 6, 2008.

  1. renee

    renee Guest

    Hi,

    My pins are on M2, and when I do routing, some pins are connected
    through vias. I only want to connect standard cells pins with wires,
    not with vias. Where can I set this option, in lef file or in soc
    encounter?

    Thank you in advance!

    Renee
     
    renee, Aug 6, 2008
    #1
  2. renee

    S. Badel Guest

    I don't think such an "option" exists... Off the top of my head, you may try adding via blockage on
    top of the pins.


    Stéphane
     
    S. Badel, Aug 14, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. what must be associated in verilog file with LEF when imported in the SOC ENCOUNTER?

  2. SoC Encounter

  3. SoC Encounter via array.

  4. About floorplan and route using SOC Encounter

  5. problem about timing analysis in soc encounter

  6. SoC Encounter: how to create an N-Well?

  7. How to use a DEF in SoC Encounter

  8. What do these two tools used in?? (1st Encounter / Soc Encounter)

Loading...