How to replace in-place reference plane?

Discussion in 'SolidWorks' started by Haude Daniel, May 30, 2007.

  1. Haude Daniel

    Haude Daniel Guest

    Hello,
    I've added an in-place part into the top plane of an assembly
    but would now like to replace that plane with another one.
    Unfortunately, SW refuses to "replace mate entities" with
    in-place parts. Can this be solved elegantly rather than
    having to delete this mate and replacing it with three
    plane mates?

    Thanks,

    --Daniel
     
    Haude Daniel, May 30, 2007
    #1
  2. Haude Daniel

    Dale Dunn Guest

    -hamburg.de (Haude Daniel) wrote in
    'Fraid not.
     
    Dale Dunn, May 30, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. how to change the insertpoint of a block,and keep the insert objects's place

  2. HOW could I search a place in the extracted view<<<<<<<<

  3. How can I place a guard ring on my chip

  4. How to know the rotation of the instance when you are edit-in-place ?

  5. How to transform the point of the 3 paths to top level when you arein edit-in-place ?

  6. using a reference plane position in an equation

  7. Basic Question copying from plane to plane

  8. How can I delete this external reference (mirrored part using plane of another part)

Loading...