How to display sketch dimension in part

Discussion in 'SolidWorks' started by dlevy, Feb 28, 2005.

  1. dlevy

    dlevy Guest

    I cannot figure out how to display a driven sketch dimension in a part. Any
    help is appreciated.
     
    dlevy, Feb 28, 2005
    #1
  2. dlevy

    Wayne Tiffany Guest

    Go up to View and make sure you have Sketches checked.

    WT
     
    Wayne Tiffany, Feb 28, 2005
    #2
  3. dlevy

    dlevy Guest

    That is checked.

     
    dlevy, Feb 28, 2005
    #3
  4. dlevy

    Wayne Tiffany Guest

    I just opened an assy and put a dimension between 2 parts, that is a
    read-only dim. It now shows up just fine. Do a RMB on the Annotations
    folder at the top of the tree and see if you have Display Annotations & Show
    Reference Dimensions checked.

    WT
     
    Wayne Tiffany, Feb 28, 2005
    #4
  5. dlevy

    dlevy Guest

    Many thanks from a newbie!

     
    dlevy, Feb 28, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. What is "Text Display"? Text Display vs. Label

  2. How do I control the display of finish symbols in part and assembly mode

  3. How can I delete this external reference (mirrored part using plane of another part)

  4. can a sketch dimension drive a "feature dimension"

  5. can't mate part level point or sketch point to assembly level sketch (arc)

  6. Using a dimension of a part to pull a part into an assembly

  7. How to get sketch dimension in drawing?

  8. display username or computer name on the display panel & logs

Loading...