How to create inductor cell for simulation and LVS?

Discussion in 'Cadence' started by Frank, Jan 24, 2006.

  1. Frank

    Frank Guest

    Hi all,

    I have a layout and the S-parameters for and inductor which is going to
    be used in my circuit.

    Here is what I want to do: I want to use this S-parameters data in the
    simulation of my circuit. Then I will use the inductor layout mentioned
    above in the circuit layout. I will run the LVS and extraction and the
    post-layout simulation as well.

    How to implement the inductor cell in Cadence so that I can accomplish
    those tasks?

    I don't know how to make the extractor recorgnize the inductor
    structure and assign the correct inductor model (which is based on the
    S-parameter) to the extracted view so that I can do the post-layout
    simulation correctly.

    Thanks,

    Frank
     
    Frank, Jan 24, 2006
    #1
  2. Frank

    Andrew Beckett Guest

    And you can use the nport component from analogLib for the s-parameters.
    For more details, search for "nport app note" on http://sourcelink.cadence.com -
    there are a number of options to control how the s-parameters are handled,
    particularly in time domain simulations.

    Andrew.
     
    Andrew Beckett, Jan 25, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. LVS problem using Assura LVS

  2. Inductor Design with HFSS

  3. LVS expert! Issue with LVS-ing Standard Cells

  4. DC simulation with spiral inductor

  5. Patterned Ground Shield for Inductor

  6. advance simulation time without running simulation and then re running

  7. Bentley View: accessing cell libraries (*.cell, *.cdx)

  8. Copy Table Cell to Table Cell

Loading...