how to create a solid from edge surface

Discussion in 'AutoCAD' started by Ewa, Jan 30, 2006.

  1. Ewa

    Ewa Guest

    Hello All

    I have a 3D edge surface. Is it possible to add a thickness to it
    and in this way to create a 3D solid?

    If not a solid is it possible to create a body or region aou of
    3D edge surface.
    Thanks in advance
    Ewa
     
    Ewa, Jan 30, 2006
    #1
  2. Ewa

    aledtaylor Guest

    Yes. You need a lisp routine called M2S.lsp (Mesh to Solid).

    This will create a solid in the volume below your surface to a
    specified depth below the lowest point.

    If you want the lower surface to mimic the upper surface, copy the
    solid down and subtract the copy from the original.

    Aled Taylor
    Design Engineer
     
    aledtaylor, Jan 31, 2006
    #2
  3. Ewa

    Ewa Guest

    Hi Aled

    That is exactly what I wanted.
    Thank you very much

    regards
    Ewa
     
    Ewa, Jan 31, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Create 3D solid under surface by LISP

  2. Solid Edge is adding alot of Surface Power

  3. edge flange longer than edge used to create it.....

  4. how to assembly part (solid edge)?

  5. Batch conversion from Solid Edge files?

  6. First blush review of Solid Edge video tutorials from private guy inOzz.

  7. Spline from scr file with Solid edge 2D

  8. moulding solid with edge surface

Loading...