how to assembly part (solid edge)?

Discussion in 'SolidWorks' started by Daniele, Dec 28, 2004.

  1. Daniele

    Daniele Guest

    I have to assembly some parts with Solid edge, but I can't place these parts
    where I want. I think that i should use the "match coordinate system"
    command but i don't know how!

    I have to put a sphere inside an empty prism; between the two parts must not
    be any contact; probably i have to allign coordinate planes...

    How is it possible?

    Thank you.
     
    Daniele, Dec 28, 2004
    #1
  2. Daniele

    P. Guest

    This is the SolidWorks newsgroup. For SolidEdge assistance log on to
    their newsgroup.
     
    P., Dec 28, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Sam & Solid Edge

  2. Pro-e vs. solid edge

  3. Assembly part number vs. Detail part number

  4. edge flange longer than edge used to create it.....

  5. Using a dimension of a part to pull a part into an assembly

  6. Part/Assembly tangent edge display is resetting after...

  7. Hidden lines and edge linesshowing as dark solid lines in assembly

  8. how to create a solid from edge surface

Loading...