HI, I am upgrading my old p2.8

Discussion in 'SolidWorks' started by pete, Dec 4, 2004.

  1. pete

    pete Guest

    Hi , I am upgrading my "old" P4 2.8, 2gb ddr, sata, and want to find the best processor/ motherboard combo. I intend to continue to use the WD Raptor drives, so a MB with sata built in, is the only way to go. Also I want to fit 4Gb ram, and have heard that some MB's are having problems with this much ram, ie- the ASUS P4C800-E Deluxe.
    Doe's anyone have some advice?
    Thanks
    To design is to think, I think!
     
    pete, Dec 4, 2004
    #1
  2. pete

    P. Guest

    AMD on ASUS. Don't have SATA problems there.
     
    P., Dec 4, 2004
    #2
  3. pete

    Sporkman Guest

    Can I have your old board?
    ;->
     
    Sporkman, Dec 4, 2004
    #3
  4. pete

    Chris Dubea Guest

    Boy no kidding. I'm still running AMD Athlon 800's

    ===========================================================================
    Chris
     
    Chris Dubea, Dec 9, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Upgrading profiles

  2. Upgrading to 2004

  3. Can I skip USR1 & 2 when upgrading from base release to USR3 release?

  4. Cost/benefits upgrading to wildfire.

  5. Upgrading To ProI 3.4 Next Monday... Any Post Installation Tips??

  6. Upgrading Toolbox 2003 to 2004

  7. Major problem upgrading to 2004

  8. Everyone stop upgrading, dammit!

Loading...