Help with projecting a 3d surface to 2d

Discussion in 'AutoCAD' started by Jim Lee, Nov 15, 2003.

  1. Jim Lee

    Jim Lee Guest

    Hi all,

    I'm making a model of a stadium and right now I'm working on the
    seating sections.

    I've made a 3-dimsensional ruled surface in AutoCAD that represents
    the curved area of the seats, and I am wondering if there was a way to
    "pull off" the seating section and flatten into 2-d.

    In other words, I'm trying to find the 2-d dimensionl drawing of the
    seats such that if I cut it out, I could curve into my stadium model.

    Thanks in advance,
    JL
     
    Jim Lee, Nov 15, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Projecting "0" Elev Lines onto 3D lines

  2. Projecting a reference in assembly mode

  3. Projecting a reference in assembly mode

  4. projecting edges into a sketch

  5. Projecting SolidWorks points onto surfaces

  6. Problems with "cut with surface" when working with "spilt"

  7. projecting curves

  8. Projecting (moulding, wrapping) a 2D ceiling plan to a 3D Edge surface

Loading...