[HELP] SW 2003 with USB key

Discussion in 'SolidWorks' started by Nicolas Rubin, Jan 9, 2006.

  1. Nicolas Rubin

    Nicolas Rubin Guest

    Hi,

    A customer is always using SW 2003 (!) When he create or copy a SW file
    (part, assy or drawing) on the USB key, this file is automatically in
    read-only !!!!

    This on a Windows 2000 SP 4.0 / Windows 2003 SP 5.1


    Couls you help me ?

    Thanks in advance


    Nicolas
    e-Systems
    Switzerland
     
    Nicolas Rubin, Jan 9, 2006
    #1
  2. Nicolas Rubin

    Sporkman Guest

    What's the problem with clearing the Read Only attribute on the files?
    Just right-click and choose Properties. If you want to clear the
    attribute on numerous files at one time install an applet called
    PropertiesPlus (do a Google search or go to www.pcworld.com).

    'Sporky'
     
    Sporkman, Jan 9, 2006
    #2
  3. Nicolas Rubin

    Wayne Tiffany Guest

    Or just select multiple files and then change the attribute.

    But, I also must ask why a file that is created in SW and saved directly on
    the USB key then is read-only. I wouldn't think this could happen because
    then SW couldn't save over it as you worked on it. If that's not what's
    happening, please let us know.

    WT
     
    Wayne Tiffany, Jan 9, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 10th FEM Workshop 2003 at the University of Ulm, 17th/18th July 2003

  2. Spaceball 4000 serial to usb adaptation

  3. Parallel Dongle through USB port

  4. OT Flash-based USB stick with a capacity of 8 GB

  5. Can R14 work with a USB port?

  6. VBA calling .EXE with parameter passing -- problem re-executing with ENTER key

Loading...