HELP - "name too long" errors in Export Physical

Discussion in 'Cadence' started by cadrjr, Jun 30, 2005.

  1. cadrjr

    cadrjr Guest

    I'm using PSD 15.0 on an Concept/Allegro "Reference Design" ,which
    obviously SHOULD work but doesn't ...

    When I try to Export Physical to Allegro, Netrev gives me the following
    error (many times) ...

    It looks as if my configuration is constrained to a Part Name of 31
    characters ? I have set Part Type Length to 50 in Setup.

    Anybody got any ideas ?

    RJR.



    ------ Oversights/Warnings/Errors ------


    #1 ERROR(302) Device library error detected.

    Problems with the name of device 'TE
    ST_POINT_THRU_HOLE-51-0184-001': 'name too long'.

    Device 'TEST_POINT_THRU_HOLE-51-0184-00' has library errors. Unable to
    transfer to
    Allegro.

    ........ etc.
     
    cadrjr, Jun 30, 2005
    #1
  2. cadrjr

    daytripper Guest

    Part Type isn't the same as Part Name.
    I think you're fooked. Living with such limitations since the days of
    ValidGED, you learn to be frugal with characters and inventive with
    abbreviations.

    For your example, I'd go with TP_PTH_51-0184-001 or similar...

    Cheers
     
    daytripper, Jun 30, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Physical Design Engineer Req in Bangalore

  2. Physical Constants in Ocean / Skill Scripts

  3. Hitting Physical Memory Peak when loading assembly

  4. can i install pro-e i square without a physical lan-card being prescent on my pc.

  5. has physical dynamics become too sensitive?

  6. PHYSICAL PAIN while CAD-ing?

  7. How do I add a new Physical Property in the Materials DB?

  8. File name too long

Loading...