Help: making holes in solids

Discussion in 'AutoCAD' started by A.T.E, Jun 21, 2005.

  1. A.T.E

    A.T.E Guest

    I am trying to create holes in solid (like drilling a hole in a block of
    wood). I create the block,extract it, draw a cylinder and then extract that
    as wll .Then I subtract the hole-but in shaded view it still appears
    solid(as if a thin layer is covering the hole) although in wire view you can
    see the hole is there.What am i doing wrong? I want to be able to see
    through the hole in orbit mode, but it still appears solid.
    Thanks for any help.
     
    A.T.E, Jun 21, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Help req. making lsp change ltscale of specific linetype after creation

  2. help with making a train-model, needed...

  3. help with making a stamped sheet metal part

  4. Making Holes match ?

  5. Need help dimensioning holes

  6. Small Holes Continued (On Thousands of Holes)

  7. help for creating solids

  8. Pen plotter making holes in the paper

Loading...