Hatching Ribs in a section view (of a part)

Discussion in 'SolidWorks' started by Mike P, Aug 18, 2003.

  1. Mike P

    Mike P Guest

    In a drawing of a part, if a section line passes through a rib (or
    web) it is not normally shown with hatch lines in the section view.
    Is there any way of preventing this from happening in Solidworks?
    If you section the drawing of an assembly you can use the Section
    Scope tab on View Properties to NOT hatch a selected part.... is it
    possible to do this when sectioning a part on the drawing of that
    part... ie select a feature (ie rib) that is not to be hatched by the
    section line???

    Cheers

    Mike P
     
    Mike P, Aug 18, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Part, Feature, Section Relations and Parameters - Export All?

  2. tips backlog - part and assembly section view

  3. ribs

  4. Ribs in Sections

  5. Section lines on half section

  6. Section view on different sheet than main view?

  7. Hatching for Patent Drawings - Adding New Types of Hatching

  8. Dimension from Detailed view to Section view?

Loading...