Hatched area ignores CTB settings (2004)

Discussion in 'AutoCAD' started by Matt Dwyer, Aug 20, 2003.

  1. Matt Dwyer

    Matt Dwyer Guest

    Using LT2004, I have a file that has hatches which I am attempting to plot out at about 0.003" lineweight and instead it plots out at 0.012" lineweight. Missed by THAT much.

    Dithering and grayscale are both OFF. Plot settings set to plot with Plot Styles. At layer manager, lineweight set to Default and Linetype set to Continuous.

    I can explode the hatches and it plots out just fine. So, I have a workaround, even it is a bit lame, but any ideas on a setting I may be missing?

    Matt Dwyer
    Dwyer Engineering
     
    Matt Dwyer, Aug 20, 2003
    #1
  2. Matt Dwyer

    Matt Dwyer Guest

    I was plotting from Layout paperspace, but I got same results from model.

    Matt Dwyer
    Dwyer Engineering
    PaperSpace or ModelSpace?
     
    Matt Dwyer, Aug 20, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to solve layout Minimum Density Area across chip / CHIP Area must be >= 14%

  2. Is this possible, area of a sheetmetal part (square area)

  3. Triming or deleting a hatched area within a hatched area, after the fact

  4. dbconnect.GetLinks ignores ObjectIDs parameter

  5. Printer settings override plot settings

  6. Hatched area ignores CTB settings (2004) - SOLVED

  7. printing CTB file settings

  8. hatched region -> polyline of its contour?

Loading...