GOING FROM PAPERSPACE TO MODELSPACE

Discussion in 'AutoCAD' started by blue, Sep 21, 2006.

  1. blue

    blue Guest

    I have a couple of drawings that automatically go to zoom extents
    everytime I go from ps to ms, if my viewport is not locked. I know the
    easy thing to do is to lock my viewport but why does it do that.
     
    blue, Sep 21, 2006
    #1
  2. blue

    Michael Bulatovich Guest

    Is UCSFOLLOW set to 1?
     
    Michael Bulatovich, Sep 21, 2006
    #2
  3. blue

    Paul Turvill Guest

    As Michael says, set UCSFOLLOW to 0 (zero); it must be done in *each*
    viewport.
    ___
     
    Paul Turvill, Sep 22, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Modelspace to the center of Paperspace

  2. modelspace ID points in paperspace

  3. Layer control in modelspace/paperspace

  4. How to: Determine if viewobject is a modelspace or paperspace view?

  5. Automation Error on AcadBlockRef in PaperSpace/ModelSpace

  6. Draw in Paperspace or Modelspace

  7. Moving objects from paperspace into modelspace

  8. Paperspace pagesetups showing up in Modelspace

Loading...