global orientation

Discussion in 'AutoCAD' started by Mike Manning, Jan 19, 2004.

  1. Mike Manning

    Mike Manning Guest

    I clip-copied a polyline from a client's drawing and pasted it on my
    drawing. Now my blocks and text come in at 90 degrees. I noticed the UCS
    icon X-axis is pointing down, but when I change it, it doesn't make a
    difference
     
    Mike Manning, Jan 19, 2004
    #1
  2. Mike Manning

    wallyb Guest

    Try wblock and insert.

    Also, I think, the rotation angle of text is kept with the text and is referred to the ucs; not the wcs. Without seeing the drawing and working with it, you have not supplied enough info.

    Wally McMillan
     
    wallyb, Jan 20, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Need Start/End angles (orientation in space) from 3 coordinates

  2. Set drawing orientation/direction with 2 picks

  3. determing layout orientation

  4. Pcell, Label and orientation.

  5. Cadence Encounter: set the cell orientation

  6. Standard Orientation - Wildfire 2.0

  7. ghostscript pdf orientation

Loading...